Edimax PRI-682 Dual WAN Router with inbound + outbound Load Balancing, FailOver and QoS

PermaLink PRI-682

InBound & OutBound Load Balancing Broadband Router

Dual WAN Broadband Router

Aggregate Bandwidth
Mix DSL, Cable and Satellite broadband lines
Failover between WAN lines
Load Balancing between WAN lines
Economical T1 alternative, pay for itself

Description

Get Industrial Strength Load-balancing and Fault-tolerance for Non-stop Access to Your Self-hosted Internet Servers

The most unique feature of the Edimax's Professional and Industrial grade PRI-682 dual WAN broadband routers is the support for inbound load-balancing. This is the critical feature that enables you to have reliable, fail-safe, self-hosting of Internet servers. Inbound load balancing is with respect to the PRI-682, whereby Internet service requests are incoming to the PRI-682 (Inbound) to access your Internet Web servers on the LAN. If you have your own Web server, mail server, and FTP server, then using the PRI-682 is a smart choice because by using multi-WAN, it will provide additional bandwidth as well as non-stop fail-safe redundancy. You will have the same capabilities as multi-million dollar web hosting company, i.e. higher upload bandwidth and bulletproof, fail-safe redundancy.

Replace your costly T1 or E1 monthly fee with multiple WAN Lines and the PermaLINK PRI-682

The PermaLINK PRI-682 "paid-for-itself" in 2 months by replacing your expensive T1 or E1 monthly fee with low cost ADSL or Cable Lines. You'll also get better performance and non-stop fault tolerance as well as substantial money saved every month.

Increasing Internet Speed is as simple as 1 + 1 = 2

The advent of widespread broadband accesses makes the business case, that two links is better than one. With multiple WAN connections and the PRI-682, you will get the effective combined Dual-WAN speeds for all your LAN users. You will also get a redundant, fault-tolerant, and fail-over capability to insure that you will have non-stop Internet access when some of the ISP’s link is down. If you have Dual WAN connections from two different ISP, it would be unlikely for both WAN lines to be disconnected simultaneously. To some businesses this reliable connection is vital because the downtime of even just a few minutes is equal to quite a bit of revenue loss. That is why we named our product PermaLINK

In addition to the standard features of a professional grade router, our PRI-682 has the following exclusive features:

* Supports 2 WAN lines

* Has a Built-in DNS Server providing inbound load balancing

* Supports both Inbound and outbound load balancing

* Performs Outbound load balancing by session, weight round robin or traffic

* Includes Quality of Service (QoS) control

* Sends Email alert

Key Features

Features and Benefits - Multi-Homing
In-bound Load Balancing	Use Authoritative DNS for non-stop Web hosting
Out-bound Load Balancing	Based on Session/Weight Round Robin/Traffic algorithm
Multiple WAN Ports	Aggregate bandwidth by combining 2 WAN lines
DSL or Cable	Mix DSL and Cable modem broadband lines
Failover	Failover between WAN ports for un-interrupted connection
Load Balancing	Distributed over the dual WAN ports
27 Mbps Data Rate	High WAN to LAN throughput
T1 alternatives	Take advantage of the low-cost DSL & cable modem
Features and Benefits - Router
Internet Sharing	Support up 253 users to share 2 WAN lines
DSL & Cable	Internet access via DSL or Cable Modem
NAT	Multi NAP/PAT support
	Virtual Server Mapping support
	NAP pass-through support (Netmeeting, messenger, Real Audio, CuSeeMe)
DMZ Host	Support multiple DMZ host
VPN & VoIP	VPN pass-through support (IPSEC/PPTP)
	VoIP pass-through support (H.323ALG)
Firewall	Block users' access of internet
	Block users' access of specific web sites
	Control users' internet access days & times
	URL blocking by address or keywords
	Intrusion Detection with Email alert
	DMZ re-direct all packets from WAN port to specific local IP
	Natural firewall by NAT (Network Address Translation)
QoS Bandwidth Control	Prioritize service by classifying packets
Router Status Monitoring	DHCP Client and security log
	Device/Connection Status
Remote Management	Configure and upgrade from remote site via internet
Professional Capability	Router configuration backup, recovery and reset
Friendly Interface	Web-based GUI for configuration and management
DHCP	Built-in DHCP server configuring IP address automatically
UPnP	Automatic configuration between router and applications

Specifications

Model NO.	PRI-682	PRI-684
CPU	150MHz MIPS
WAN Port	10/100M UTP Port x 2	10/100M UTP Port x 4
LAN Port	10/100M UTP Port x 1 (auto MDI/MDIX)	10/100M UTP Port x 1 (auto MDI/MDIX)
Weight	600g
Power	Output 5V DC/2.8A, Input AC100~240V (external switching power)
Dimension	50(H)180(W)160(D) mm
Temperature	0~40 C
Humidity	10~95% (Non-Condensing)
ESD	+/- 4KV
Certification	FCC Class B, CE Mark

【Table Of Content】