PS-3207U
Fast Ethernet 2 USB 2.0 + 1 Parallel Port Print Server
  • Complies with IEEE 802.3/802.3u standards
  • Includes multilingual EZmax Setup Wizard
  • Share upto 2 USB and 1 parallel printers within the network
  • Supports TCP/IP, IPX/SPX, NetBEUI and Apple Talk protocols
  • Supports LPR, IPP, SMB/TCP and RAW printing protocols
  • Supports DHCP Server and Client protocols
  • Supports Auto MDI/MDI-X
  • Compatible with Windows 2000/XP/Vista, MAC OS 10.4.x and above
Overview

Broad Selection of Printing Methods
The PS-3207U print server supports a wide selection of printing protocols such as LPR, IPP, SMB/TCP and RAW printing. They can also work with different network protocols like, TCP/IP, IPX/SPX, NetBEUI, and Apple Talk. This gives you a variety of printing methods to choose from based on your requirements.

Double-purposed DHCP Server/Client
The printer server can act as a DHCP server that lets your LAN clients to automatically obtain an IP address. It can also act as a DHCP client allowing easy integration to your existing network.

Fault-Tolerant Firmware Upgrades
You do not need not worry about an error occur while the firmware is being upgraded. The PS-3207U  server incorporates a fault-tolerant upgrade function that guarantee 100 percent firmware upgrade success.

User-friendly Setup Wizard and Driver CD*
To facilitate connection to your printer, the PS-3207U print server bundled with a user-friendly EZmax setup wizard CD. Its easy-to-use windows installation wizard simplifies and enhances the installation procedures, you can set it up within a minute. Once you have installed the print server, you can access and configure the print server via the web browser from any computers which is within the network.

Specifications
HARDWARE INTERFACE
CPU / MEMORY
POWER ADAPTER
  • One parallel port
  • Two USB 2.0 ports
  • One 10/100Mbps LAN port
  • Reset button
  • 2MB NOR Flash
  • 16MB SDRAM
  • 12VDC / 1A
INSTALLATION & MANAGEMENT KITS
OS
LED
  • Multilingual EZmax Setup Wizard
  • Admin Utility included
  • Web-based Management
  • Firmware upgrade utility
  • Print Server : Windows 2000/XP/2003/Vista/7, Mac 10.x above and Linux/Unix     
  • Printer 1/2/3
  • Power
  • LAN 10/100Mbps
SYSTEM  REQUIREMENTS
DIMENSION
HUMIDITY & TEMPERATURE
  • CPU: Pentium III 1G above or similar
  • Memory size: 256MB RAM
  • One CD-ROM drive
  • Hard Disk: Min. of 100MB disk space
  • USB and Parallel Printers
  • Fast Ethernet network
  • 187 (W) x  30 (H) x 100 (D) mm
  • 10-90%(Non-condensing)
  • 0 o C ~40 o C
CERTIFICATIONS
  • CE, FCC

 

 


Download Area
 Datasheet  Quick Install Guide  Driver  FAQ
 Compatibility  Product Images  Manual  Firmware
 Linux Source Code  CE DoC