PS-1210Un
Wireless 802.11b/g/n USB 2.0 Print Server
  • Complies with wireless 802.11b/g/n standards
  • Includes multilingual EZmax Setup Wizard
  • Shares USB printer among the network users
  • Print Server : Supports TCP/IP, LPR, IPP and Raw printing protocols
  • Supports DHCP Client protocols
  • Supports Web-based, Telnet management and Windows configuration Utility
  • Supports Auto MDI/MDI-X
  • Compatible with most popular MFP printers*
Overview

Complies with wireless 802.11n standards
With the latest wireless 802.11n technology, the transmission data rate of  PS-1210Un can be up to 150Mbps, it allows  stronger wireless signal and guarantee high speed wireless connections compared to a standard wireless 802.11b/g network.

Broad Selection of Printing Methods
The PS-1210Un USB print server supports a wide selection of printing protocols such as LPR, IPP, SMB/TCP and RAW printing. They can also work with different network protocols like, TCP/IP, IPX/SPX, NetBEUI, and Apple Talk.This gives you a variety of printing methods to choose from based on your requirements.

Fault-Tolerant Firmware Upgrades
You do not need not worry about an error occur while the firmware is being upgraded. The PS-1210Un  server incorporates a fault-tolerant upgrade function that guarantee 100 percent firmware upgrade success.

User-friendly Setup Wizard and Driver CD*
To facilitate connection to your printer, the PS-1210MFn MFP server bundled with a user-friendly EZmax setup wizard CD. Its easy-to-use windows installation wizard simplifies and enhances the installation procedures, you can set it up within a minute. Once you have installed the print server, you can access and configure the print server via the web browser from any computers which is within the network.
Specifications
HARDWARE INTERFACE
CPU / MEMORY
POWER ADAPTER
  • Wireless 802.11b/g /n
  • One USB port
  • One 10/100Mbps LAN port
  • Reset button
  • One 2dBi antenna
  • 2MB NOR Flash
  • 16MB SDRAM
  • 5VDC / 1A
INSTALLATION & MANAGEMENT KITS
SECURITY
LED
  • Multilingual EZmax Setup Wizard
  • Admin Utility included
  • Web-based Management
  • Firmware upgrade utility
  • 64/128-bit WEP Encryption and WPA-PSK,  WPA2-PSK security

         
  • WLAN
  • STATUS
  • LAN
SYSTEM  REQUIREMENTS
OS
HUMIDITY & TEMPERATURE
  • CPU: Pentium III 1G above or similar
  • Memory size: 256MB RAM
  • One CD-ROM drive
  • Hard Disk: Min. of 100MB disk space
  • USB Printer
  • Wireless 802.11b/g/n or Fast Ethernet network
  • Print Server : Windows 2000/XP/2003  /Vista/7, Mac 9.x above and Linux/Unix  
  • 10-90%(Non-condensing)
  • 0 o C ~40 o C
DIMENSION
OUTPUT POWER
CERTIFICATIONS
  • 60 (W) x  22 (H) x 81 (D) mm ( without Antenna)
  •  16-18dBm
  • CE, FCC

Download Area
 Datasheet  Quick Install Guide  Driver  FAQ
 Compatibility  Product Images  Manual  Firmware
 Linux Source Code  CE DoC