Overview

Edimax's 24/32 ports Fast Ethernet Switch brings you the most powerful high speed network solutions. You can deploy Fast Ethernet switching wherever needed, from the backbone down to individual desktops. This switch satisfies the need for high-quality products at an affordable price - enabling even the most budge-conscious organizations to trade up to the next level of networking power.

This switch supports 10/100Mbps auto-negotiation on all ports, for seamless migration to 100Mbps connections without time-consuming trips to the wiring closet whenever end stations are upgraded to Fast Ethernet. All ports also automatically sense half or full duplex connections for high speed server or switch-to-switch configurations. The aggregate bandwidth of this switch can reach up to 3Gbps.

200Mbps Full Duplex Transmission
Edimax ES-3132RL/ES-3124RL are high speed Fast Ethernet switch for small or large businesses. Both switches not only compliy with IEEE 802.3/IEEE 802.3u 10/100Mbps Ethernet standard but also support full duplex transmission. The full duplex feature can double the network throughput on every port. It is used for high speed server or switch-to-switch connections. The ES-3132RL/ES-3124RL boast a maximum throughput of 200Mbps for every port.

SUPPORT S WIRE-SPEED AND FLOW CONTROL
The switches’s built-in non-blocking and store-and-forward architecture equip your network with full-wire speed connections. It accommodates flow control for full duplex mode and back pressure for half-duplex mode – ensuring reliable data transfer and preventing data loss. Use these switches to create high-speed networks and benefit from its ultimate performance and reliability.

SUPPORTS  AUTO-MDI/MDI-X
ES-3132RL/ES-3124RL support auto-MDI/MDI-X function so you can use either straight-through or cross-over Ethernet cable to connect Ethernet devices. The switches will automatically detect the right cable and speed for your device.