EnduraLink BR-724

Print This Page

InBound & OutBound Load Balancing Broadband Router
  Dual WAN Broadband Router
  • Increase Bandwidth
  • Mix DSL, Cable and Satellite broadband lines
  • Failover between WAN lines
  • Load Balancing between WAN lines
  • Economical T1 alternative, pay for itself
  • QoS support
  • Transparent Bridge
  • Easy DNS support for 6 domain names


Press Release Manual Datasheet

Contact Us for Where-to-Buy


Get Industrial Strength Load-balancing and Fault-tolerance for Non-stop Access to Your Self-hosted Internet Servers

The most unique feature of the Edimax's Professional and Industrial grade BR-724 dual WAN broadband routers is the support for inbound load-balancing.  This is the critical feature that enables you to have reliable, fail-safe, self-hosting of Internet servers.  Inbound load balancing is with respect to the BR-724, whereby Internet service requests are incoming to the BR-724 (Inbound) to access your Internet Web servers on the LAN.  If you have your own Web server, mail server, and FTP server, then using the BR-724 is a smart choice because by using multi-WAN, it will provide additional bandwidth as well as non-stop fail-safe redundancy.  You will have the same capabilities as multi-million dollar web hosting company, i.e. higher upload bandwidth and bulletproof, fail-safe redundancy.

Replace your costly T1 or E1 monthly fee with multiple WAN Lines and the EnduraLink BR-724

The EnduraLink BR-724"paid-for-itself" in 2 months by replacing your expensive T1 or E1 monthly fee with low cost ADSL or Cable Lines.  You'll also get better performance and non-stop fault tolerance as well as substantial money saved every month.

Increasing Internet Speed is as simple as 1 + 1 = 2

The advent of widespread broadband accesses makes the business case, that two links is better than one.  With multiple WAN connections and the BR-724, you will get the effective combined Dual-WAN speeds for all your LAN users.  You will also get a redundant, fault-tolerant, and fail-over capability to insure that you will have non-stop Internet access when some of the ISP’s link is down.  If you have Dual WAN connections from two different ISP, it would be unlikely for both WAN lines to be disconnected simultaneously.  To some businesses this reliable connection is vital because the downtime of even just a few minutes is equal to quite a bit of revenue loss.  That is why we named our product EnduraLink

In addition to the standard features of a professional grade router, our BR-724 has the following exclusive features:

    * Supports 2 WAN lines
    * Has a Built-in DNS Server providing inbound load balancing
    * Supports both Inbound and outbound load balancing
    * Performs Outbound load balancing by four methods
    * Includes Quality of Service (QoS) control
    * Sends Email alert

  Key Features 

Features and Benefits - Multi-Homing

In-bound Load Balancing
 Use Authoritative DNS for non-stop Web hosting
Out-bound Load Balancing
 4 smart load-balancing algorithms

Multiple WAN Ports  

 Increase bandwidth by combining 2  WAN lines (dual data-lane highway; greater    packet carrying capacities.)

DSL or Cable  

 Mix DSL and Cable modem broadband lines
Failover    Failover between WAN ports for un-interrupted connection
Load Balancing    Distributed over the dual WAN ports
44 Mbps Data Rate    High WAN to LAN throughput 

T1 alternatives  

 Take advantage of the low-cost DSL, Cable, Satellite & Wireless broadbands

 Features and Benefits - Router

Internet Sharing  

 Support up 253 users to share 2 WAN lines (recommended for 50~100 users)
Support All Broadband types     Internet access via DSL, Cable Modem, Satellite, Cellular Radio, T1, ISDN, etc.
NAT   NAT Alias
   Virtual Server Mapping support
DMZ Host    Support multiple DMZ host  
 VPN & VoIP  VPN pass-through support (IPSEC/PPTP)


 Block users' (5 groups) access of internet 
   Block users' (5 groups) access of specific web sites 
   URL blocking by address or keywords
   DMZ re-direct all packets from WAN port to specific local  IP  
   Natural firewall by NAT (Network Address Translation)

QoS Bandwidth Control

 Prioritize service by classifying packets
  Router Status Monitoring    DHCP Client and security log  
   Device/Connection Status
Remote Management  Configure and upgrade from remote site via internet
Professional Capability  Router configuration backup, recovery and reset 

Friendly Interface

 Web-based GUI for configuration and management


 Built-in DHCP server configuring  IP address automatically


 Automatic configuration between router and applications


Model NO.
175MHz RISC, 1M flash, 16M DRAM & 44 Megabits/sec
WAN Port
10/100M UTP Port x 2
10/100M UTP Port x 4
LAN Port
10/100M UTP Port x 4 (auto MDI/MDIX)
10/100M UTP Port x 4 (auto MDI/MDIX)
Power Output 5V DC/1.5A
34(H)*245(W)*140(D) mm
0~40 C
10~95% (Non-Condensing)
ESD +/- 4KV
FCC Class B, CE Mark


Table Of Content