BR-6228nS
150Mbps Wireless 802.11b/g/n Broadband Router
  • Complies with 802.11b/g and compatible with 802.11n standards
  • Supports WISP (wireless ISP) connection mode
  • Supports Green technology for power saving
  • Includes EZmax multi-language setup wizard for internet connection, wireless settings and firmware upgrade
  • Supports WEP, WPA, WPA2, DDNS, DMZ, Virtual Server, QoS and DHCP
Overview

Wireless Green Technology
Edimax BR-6228nS implemented the latest wireless green technology which could save energy by detecting the usage of wireless transference. It could supply the right amount of power to reach each connected wireless device when they are performing data transmission and save up to 74% of the power consumption. When in full loading, BR-6228nS could also save 50% power consumption than non-green solution routers.

Impressive Data Transmission Rate via IEEE802.11n
Edimax BR-6228nS is a high speed solution that complies with wireless IEEE 802.11b/g, and is compatible with IEEE 802.11n standard. When fine-tuned to operate using the wireless 802.11n technology, BR-6228nS wireless data transmission rate can reach up to 150Mbps Ė a coverage 3 times better than a standard 802.11g/b router. BR-6228nS is truly a high performance and cost-effective solution for your home and small business environments.

Extensive Internet Connection Sharing
With the built in NAT (Network Address Translation) function , the Edimax BR-6228nS allows up to 253 wired or wireless clients to simultaneously share an Internet connection.

Flexible WISP ( Wireless Internet Service Provider) Connection Mode
Wireless connection from your broadband router to an ISPís Access Point is also possible. When the BR-6228nS is assigned to perform such task, it repeats the signal from a wireless Internet Service Provider to your home or office, simultaneously allowing connection of both wired and wireless stations to the Internet.

Easy & Multilingual Setup Installation CD*
A unique multilingual Setup Wizard is provided in the installation CD. By simply following the animated installation procedures, connection of your router to the Internet is done within minutes!

WPS (Wi-Fi Protected Setup) Button
Edimax BR-6228nS supports you to build the connection between wireless network client and the router by simply pressing the WPS button on the wireless client and the router. No need to set up and configure the security on a wireless network.

Specifications
HARDWARE INTERFACE
MANAGEMENT
FUNCTIONS
  • 1 RJ-45 WAN Port
  • 4 RJ-45 LAN Port
  • LED Indicators: Power, Wireless, WAN, LNK/ACT for LAN
  • 1 Fixed 3dBi Antenna
  • WPS Reset Button
  • 12-language User Interface
  • Supports Remote Management
  • Supports EZView Management
  • System Status and Security Log (Web Interface)
  • Firmware Upgradeable
  • Supports AP , AP Client , Bridge , Bridge+ WDS, and Universal Repeater mode
  • Port Triggering for Special Applications
  • DDNS and SIP
  • Virtual Server and DMZ
  • MAC/IP filter and URL blocking
  • Static Routing
  • UPnP
  • Schedule Control
  • VPN Pass Through (IPSec/PPTP)
WAN
INSTALLATION
MEMORY
  • Supports WISP connection mode
  • Supports cable/xDSL modem
  • WAN protocol: PPPoE, Static IP, PPTP, Dynamic  IP, L2TP
  • Multi-language EZMax Setup Wizard
  • 4 MB NOR Flash
  • 16 MB SDRAM
SECURITY
OUTPUT POWER & SENSITIVITY GAIN
HUMIDITY & TEMPERATURE
  • NAT/NAPT IP Sharing
  • 64/128-bit WEP Encryption and WPA-PSK, WPA2-PSK security
  • QoS for critical operations
  • DHCP Server/Client
  • SPI Anti-Dos Firewall
  • 11n: 15±1dBm
  • 11g: 15±1dBm
  • 11b: 18±1dBm
  • 11n (40MHz): -68dBm
  • 11n (20MHz):  -71dBm
  • 11g: -74dBm
  • 11b: -87dBm
  • 10-90%   (Non-condensing)
  • 0~45 Degree Celsius
POWER ADAPTER
DIMENSION
CERTIFICATIONS
  • DC 5V, 1A
  • 134 x 110 x 26 mm
  • CE, FCC

NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
An example of how the BR-6228nS can be setup:

Download Area
 Datasheet  Quick Install Guide  Driver  FAQ
 Compatibility  Product Images  Manual  Firmware
 Linux Source Code  CE DoC